COMPLETE KITS
Homepage
COMPLETE KITS
Complete kit for seamless bathrooms with MARFINO microcement

Complete kit for seamless bathrooms with MARFINO microcement

SKU: Q0001
Category: COMPLETE KITS

The complete set for seamless MARFINO bathrooms, well thought-out, reliable and good

Price as configured

Available immediately
Delivery time: 3 - 5 Workdays (DE - int. shipments may differ)

Configure

Primer

Please select only one component.

You always need a primer if the substrate is absorbent (masonry, plasterboard, plaster).

If this is not the case, you can omit this component.

The primer has the task of removing the absorbency of the substrate and at the same time ensuring a non-slip surface for subsequent coats.

We recommend our solvent-free SQ-TIEFGRUND for this purpose.

Deselect component 0,00 €: Item details

Quantity: 1

SQ penetrating primer, solvent-free, 1 l

SQ penetrating primer for every 10 m² +16,90 €: 16,90 € per 1 l

1 litre container SQ penetrating primer

SQ penetrating primer is a solvent-free product for the preparation of concrete or plaster surfaces. It penetrates particularly deeply into the substrate, reduces absorbency and stabilises chalking or sanding surfaces. It is the ideal pre-treatment for subsequent coats of paint or levelling compounds to prevent damage caused by absorbent substrates and poor adhesion. You can use SQ-TIEFGRUND on cementitious materials as well as on gypsum substrates. The pure acrylate-based product is low-odour and free from harmful emissions. The consumption per coat is 100 - 150 ml per square metre.

Item details

SQ penetrating primer, solvent-free, 5 l

SQ penetrating primer for every 50 m² +46,80 €: 9,36 € per 1 l

5 litre container SQ penetrating primer

SQ penetrating primer is a solvent-free product for the preparation of concrete or plaster surfaces. It penetrates particularly deeply into the substrate, reduces absorbency and stabilises chalking or sanding surfaces. It is the ideal pre-treatment for subsequent coats of paint or levelling compounds to prevent damage caused by absorbent substrates and poor adhesion. You can use SQ-TIEFGRUND on cementitious materials as well as on gypsum substrates. The pure acrylate-based product is low-odour and free from harmful emissions. The consumption per coat is 100 - 150 ml per square metre.

Item details

Quantity: 1

SQ penetrating primer, solvent-free 10 l

SQ penetrating primer for every 100 m² +74,60 €: 7,46 € per 1 l

10 litre container SQ penetrating primer

SQ penetrating primer is a solvent-free product for the preparation of concrete or plaster surfaces. It penetrates particularly deeply into the substrate, reduces absorbency and stabilises chalking or sanding surfaces. It is the ideal pre-treatment for subsequent coats of paint or levelling compounds to prevent damage caused by absorbent substrates and poor adhesion. You can use SQ-TIEFGRUND on cementitious materials as well as on gypsum substrates. The pure acrylate-based product is low-odour and free from harmful emissions. The consumption per coat is 100 - 150 ml per square metre.

Item details

Sealing

Please select only one component.

You always need a seal if the areas to be designed are in the splash water area.

If this is not the case or if a functional seal already exists, you can omit this component.

The purpose of the waterproofing is to protect the underlying structure so that no moisture can penetrate and cause damage.

We recommend our DSB sealing compound for this purpose.

Deselect component 0,00 €: Item details

Quantity: 1

DSB flexible cement-based sealing slurry 5 kg

DSB sealing slurry for every 1.5 m² +62,50 €: 12,50 € per 1 kg

5 kg container DSB Sealing slurry for 1.5 m²

DSB is a cement-based sealing slurry for sealing surfaces in sanitary and damp areas. It is flexible and crack-bridging and reliably protects moisture-sensitive substrates against the ingress of water. DSB is applied in 2 to 3 coats. The working time is approx. 60 minutes and the setting time approx. 3 hours. Consumption is 1.6 kg per mm layer thickness. A total layer thickness of 2 mm is recommended.

Item details

INTOPAKT DSB flexible cement-based sealing slurry, 25 kg

DSB sealing slurry for every 7.5 m² +207,50 €: 8,30 € per 1 kg

25 kg container DSB Sealing slurry for 7.5 m²

DSB is a cement-based sealing slurry for sealing surfaces in sanitary and damp areas. It is flexible and crack-bridging and reliably protects moisture-sensitive substrates against the ingress of water. DSB is applied in 2 to 3 coats. The working time is approx. 60 minutes and the setting time approx. 3 hours. Consumption is 1.6 kg per mm layer thickness. A total layer thickness of 2 mm is recommended.

Item details

Carrier layer

Please select only one component.

You always need a base layer if there is a problematic substrate to which the intended microcement would not adhere well enough. This could be an existing tiled substrate, for example, which would otherwise be too smooth, or a lightweight OSB wall, or even a substrate sealed with sealing slurry.

If this does not apply and the substrate is unproblematic in your case, you can omit this component. Generally unproblematic substrates are, for example, uniformly plastered wall surfaces or smooth screed surfaces.

The approximately 1 mm thick base layer ensures that a durable and load-bearing connection is established to the existing substrate so that the subsequent layers cannot peel off again later. It also guarantees that no undesirable discolouration or colour shading occurs if the substrate is inhomogeneous or made up of different materials.

As a rule, an armour fabric is embedded in the substrate layer for reinforcement (see next component).

We recommend our high-quality white KLEMO adhesive for the base layer.

Deselect component 0,00 €: Item details

Quantity: 1

KLEMO adhesive mortar for every 2 m² +19,80 €: 3,96 € per 1 kg

5 kg container of KLEMO adhesive mortar for 2 m²

KLEMO® adhesive mortar is our high-quality white marble adhesive that can be used as a tile adhesive, for mosaics and as a carrier layer for microcement wall levelling.

The material is used wherever there are particularly high requirements in terms of adhesion to the substrate.

KLEMO® is white and can be coloured by adding pigments. The hardened concrete is weatherproof and frost-resistant.

Item details

KLEMO adhesive mortar for every 10 m² +51,80 €: 2,07 € per 1 kg

25 kg container of KLEMO adhesive mortar for 10 m²

KLEMO® adhesive mortar is our high-quality white marble adhesive that can be used as a tile adhesive, for mosaics and as a carrier layer for microcement wall levelling.

The material is used wherever there are particularly high requirements in terms of adhesion to the substrate.

KLEMO® is white and can be coloured by adding pigments. The hardened concrete is weatherproof and frost-resistant.

Item details

Textile insert

Please select a maximum of 1.

You need a textile inlay to reinforce the substrate layer if you want to ensure that the substrate layer has a uniform thickness everywhere and remains permanently intact even where different materials adjoin each other in the substrate. This prevents uneven penetration of discolouration from the substrate and the formation of cracks, delamination and other defects.

The textile inlay also makes it much easier to smooth the substrate layer evenly once it has been laid into the fresh substrate layer, ensuring a uniform and even overall appearance at the end.

We recommend our armoured fabric as a textile inlay

Deselect component 0,00 €: Item details

Quantity: 1

Fibreglass Mesh 160 g/m², width 100 cm, 25 m

25 running metres of armoured fabric for every 20 m² +62,50 €: 2,50 € per 1 m²

25 running metre roll of armoured fabric for 20 m²

Our armoured mesh is used to reliably prevent cracks in wall and floor coatings. It is worked into the bottom layer of the mineral coating to be applied and, depending on the system, covered by one or more further layers. The weight per unit area is 160 g/m² and the mesh size is 4.5 mm. The material is made of E-glass and is protected against the attack of alkaline media by a coating of SBR latex.

An overlap width of 10 to 25 cm must be maintained during processing.

Item details

Quantity: 1

Fibreglass Mesh 160 g/m², width 100 cm, 50 m

50 linear metre roll of armoured fabric for every 40 m² +86,70 €: 1,73 € per 1 m²

50 running metre roll of armoured fabric for 40 m²

Our armoured mesh is used to reliably prevent cracks in wall and floor coatings. It is worked into the bottom layer of the mineral coating to be applied and, depending on the system, covered by one or more further layers. The weight per unit area is 160 g/m² and the mesh size is 4.5 mm. The material is made of E-glass and is protected against the attack of alkaline media by a coating of SBR latex.

An overlap width of 10 to 25 cm must be maintained during processing.

Item details

Top layer

Please select only one component.

The top layer of MARFINO® Concrete Surface Microcement is the visible Surface.

For single-layer levelling, the consumption is approximately 1 kg per m². As a rule, a single layer of levelling compound is sufficient. If you prefer a two-layer levelling coat in order to achieve an even more perfect result, please double the quantity of MARFINO® ordered, as the selection preconfigured here only provides for a single levelling coat for an area of 20 m².

MARFINO® Concrete Surface is available in various colours, from which you can choose here. If you want to mix in the pigments of your choice to achieve your own colour shade, please select the colour white, as this is the natural shade of MARFINO® without pigments. In this case, we recommend using our GRAN-X pigments for an optimum colour result.

MARFINO CONCRETE SURFACE Microcement 5 kg cement gray

MARFINO® CS microcement in cement grey for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

MARFINO CONCRETE SURFACE Microcement 5 kg basalt gray

MARFINO® CS microcement in basalt grey for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

MARFINO CONCRETE SURFACE Microcement 5 kg petrol

MARFINO® CS microcement in petrol for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

MARFINO CONCRETE SURFACE Microcement 5 kg oxblood

MARFINO® CS microcement in oxblood for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

MARFINO CONCRETE SURFACE Microcement 5 kg turquoise

MARFINO® CS microcement in turquoise for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

MARFINO CONCRETE SURFACE Microcement 5 kg white

MARFINO® CS microcement in white for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

MARFINO CONCRETE SURFACE Microcement 5 kg rosé

MARFINO® CS microcement in rosé for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

MARFINO CONCRETE SURFACE Microcement 5 kg mud

MARFINO® CS microcement in mud for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

MARFINO CONCRETE SURFACE Microcement 5 kg mint

MARFINO® CS microcement in mint for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

MARFINO CONCRETE SURFACE Microcement 5 kg ivory

MARFINO® CS microcement in ivory for every 5 m² +98,50 €: 19,70 € per 1 kg

5 kg container MARFINO CS for 5 m²

Our MARFINO® CONCRETE SURFACE microcement is a high-quality wall covering for interior and exterior use that is applied with a trowel or spatula. This makes it very easy to create attractive visible surfaces on walls, seamless bathrooms and mineral furniture fronts.

MARFINO® CONCRETE SURFACE contains cement as a binder and is therefore open to diffusion and non-combustible, can also be used in permanently damp environments without any problems and is absolutely insensitive to mould growth thanks to its alkalinity. In addition, MARFINO® CONCRETE SURFACE is extremely low-emission due to its low proportion of plastic additives and is therefore also very suitable for living spaces.

Item details

Silicification

Please select only one component.

You need silicification to harden the surface produced with MARFINO® CS and make it resistant to water. This is particularly essential in splash water areas.

We recommend our tried and tested LFC for silicification.

Deselect component 0,00 €: Item details

Quantity: 1

LFC Verkieselung für je 2 m² +27,30 €: 54,60 € per 1 l

500 ml Gebinde LFC für 2 m²

Mit LFC haben Sie die Möglichkeit, Oberflächen aus Beton nachträglich durch Verkieselung wasserdicht zu machen und zu festigen. Das Produkt auf Basis von speziellem Wasserglas, ist fast unsichtbar und rein mineralisch. Es eignet sich zur Abdichtung von Schalen, Brunnen und anderen Gefäßen aus Beton und bietet perfekten Langzeitschutz für alle ansonsten unbehandelten Betonoberflächen.

LFC ist lösemittelfrei und daher in der Anwendung sehr angenehm. Da es sich aber um ein flüssiges Glas handelt, sollten angrenzende Glasflächen unbedingt abgedeckt werden, um Flecken durch Spritzer zu vermeiden.

Die Ergiebigkeit von LFC liegt bei etwa 4 qm pro Liter bei einmaligen Anstrich. Für die Härtung von MARFINO® Concrete Surface werden mindestens zwei Anstriche benötigt.

Item details

LFC Verkieselung für je 10 m² +85,10 €: 34,04 € per 1 l

2,5 l Gebinde LFC für 10 m²

Mit LFC haben Sie die Möglichkeit, Oberflächen aus Beton nachträglich durch Verkieselung wasserdicht zu machen und zu festigen. Das Produkt auf Basis von speziellem Wasserglas, ist fast unsichtbar und rein mineralisch. Es eignet sich zur Abdichtung von Schalen, Brunnen und anderen Gefäßen aus Beton und bietet perfekten Langzeitschutz für alle ansonsten unbehandelten Betonoberflächen.

LFC ist lösemittelfrei und daher in der Anwendung sehr angenehm. Da es sich aber um ein flüssiges Glas handelt, sollten angrenzende Glasflächen unbedingt abgedeckt werden, um Flecken durch Spritzer zu vermeiden.

Die Ergiebigkeit von LFC liegt bei etwa 4 qm pro Liter bei einmaligen Anstrich. Für die Härtung von MARFINO® Concrete Surface werden mindestens zwei Anstriche benötigt.

Item details

LFC Verkieselung für je 40 m² +314,20 €: 31,42 € per 1 l

10 l Gebinde LFC für 40 m²

Mit LFC haben Sie die Möglichkeit, Oberflächen aus Beton nachträglich durch Verkieselung wasserdicht zu machen und zu festigen. Das Produkt auf Basis von speziellem Wasserglas, ist fast unsichtbar und rein mineralisch. Es eignet sich zur Abdichtung von Schalen, Brunnen und anderen Gefäßen aus Beton und bietet perfekten Langzeitschutz für alle ansonsten unbehandelten Betonoberflächen.

LFC ist lösemittelfrei und daher in der Anwendung sehr angenehm. Da es sich aber um ein flüssiges Glas handelt, sollten angrenzende Glasflächen unbedingt abgedeckt werden, um Flecken durch Spritzer zu vermeiden.

Die Ergiebigkeit von LFC liegt bei etwa 4 qm pro Liter bei einmaligen Anstrich. Für die Härtung von MARFINO® Concrete Surface werden mindestens zwei Anstriche benötigt.

Item details

Final treatment

Please select only one component.

The final treatment is an optional protective coating that makes the surface easier to care for and less susceptible to soiling.

There are basically two options here: (1) impregnation and (2) coating. While a coating provides better protection, impregnation has the advantage that it does not create a film on the surface and therefore remains invisible, which better emphasises the natural character of the concrete. In addition, the impregnation cannot scratch or flake off

Within the coatings, there is also a distinction between one- and two-component products. If the coating is to be applied in splash water areas, a two-component product should always be used.

We recommend our tried and tested H10 as an impregnation and, alternatively, the one-component STRA-TOP coating or the two-component PUR-2 Coating.

Deselect component 0,00 €: Item details

Quantity: 1

H10 Imprägnierung für je 4 m² +20,70 €: 41,40 € per 1 l

500 ml Gebinde H10 für 4 m²

H10 ist eine unsichtbare Imprägnierung auf Basis von Silan-Siloxan, mit der sich Oberflächen aus Beton hydrophob, also wasserabweisend, machen lassen. Das Produkt dringt tief in den Untergrund ein und sorgt dauerhaft dafür, dass kein Wasser mehr aufgenommen werden kann.

Durch eine Behandlung mit H10 können Sie Betonoberflächen zuverlässig schützen, ohne das Erscheinungsbild der Oberfläche zu verändern.

H10 ist lösemittelfrei und daher in der Anwendung sehr angenehm. Die Ergiebigkeit liegt bei etwa 10 qm pro Liter.

Item details

H10 Imprägnierung für je 20 m² +59,90 €: 23,96 € per 1 l

2,5 l Gebinde H10 für 20 m²

H10 ist eine unsichtbare Imprägnierung auf Basis von Silan-Siloxan, mit der sich Oberflächen aus Beton hydrophob, also wasserabweisend, machen lassen. Das Produkt dringt tief in den Untergrund ein und sorgt dauerhaft dafür, dass kein Wasser mehr aufgenommen werden kann.

Durch eine Behandlung mit H10 können Sie Betonoberflächen zuverlässig schützen, ohne das Erscheinungsbild der Oberfläche zu verändern.

H10 ist lösemittelfrei und daher in der Anwendung sehr angenehm. Die Ergiebigkeit liegt bei etwa 10 qm pro Liter.

Item details

H10 Imprägnierung für je 80 m² +186,40 €: 18,64 € per 1 l

10 l Gebinde H10 für 80 m²

H10 ist eine unsichtbare Imprägnierung auf Basis von Silan-Siloxan, mit der sich Oberflächen aus Beton hydrophob, also wasserabweisend, machen lassen. Das Produkt dringt tief in den Untergrund ein und sorgt dauerhaft dafür, dass kein Wasser mehr aufgenommen werden kann.

Durch eine Behandlung mit H10 können Sie Betonoberflächen zuverlässig schützen, ohne das Erscheinungsbild der Oberfläche zu verändern.

H10 ist lösemittelfrei und daher in der Anwendung sehr angenehm. Die Ergiebigkeit liegt bei etwa 10 qm pro Liter.

Item details

STRA-TOP 1-K Beschichtung matt für je 4 m² +23,10 €: 46,20 € per 1 l

500 ml Gebinde STRA-TOP matt für 4 m²

STRA-TOP ist eine einkomponentige Acrylat-Zubereitung, die einen wirksamen und dauerhaften Oberflächenschutz gegen Verschmutzung und unerwünschtes Eindringen von Feuchtigkeit bewirkt.

Das lösemittelfreie Produkt auf wässriger Basis lässt sich sehr leicht mit Pinsel, Rolle oder Spritzgerät verarbeiten.

Item details

Quantity: 1

STRA-TOP 1-K Beschichtung matt für je 20 m² +69,30 €: 27,72 € per 1 l

2,5 l Gebinde STRA-TOP matt für 20 m²

STRA-TOP ist eine einkomponentige Acrylat-Zubereitung, die einen wirksamen und dauerhaften Oberflächenschutz gegen Verschmutzung und unerwünschtes Eindringen von Feuchtigkeit bewirkt.

Das lösemittelfreie Produkt auf wässriger Basis lässt sich sehr leicht mit Pinsel, Rolle oder Spritzgerät verarbeiten.

Item details

PUR-2 Topcoat 2-K Beschichtung matt für je 20 m² +214,00 €: 42,80 € per 1 kg

5 kg Gebinde PUR-2 Topcoat für 20 m²

PUR-2 Topcoat ist ein hochwertiges zweikomponentiges Polyurethanharz für die Versiegelung von Betonböden im Innen- und Außenbereich. PUR-2 erzeugt einen diffusionsoffenen seidenmatten Film auf der Oberfläche, der den Betonboden pflegeleicht macht und dauerhaft vor Witterungseinflüssen schützt. Das transparente Material ist vergilbungsfrei und wirkt beim Auftragen auf die Betonoberfläche nur geringfügig farbvertiefend.

PUR-2 Topcoat ist lösemittelfrei und kann zum Vorstreichen poröser Untergründe mit bis zu 10% Wasser verdünnt werden. Die Verarbeitung erfolgt mit dem Pinsel oder mit einer Mohair-Rolle. Benutzte Arbeitsgeräte lassen sich mit Wasser auswaschen.

Das angerührte Material lässt sich 6 Stunden lang verarbeiten. Nach 12 Stunden ist die behandelte Fläche begehbar und nach fünf Tagen voll belastbar.

Item details

Your configuration

incl. 19% VAT , plus shipping costs

Each

Description
Reviews

Configure all the components you need for your new seamless bathroom made of MARFINO microcement in no time at all. With this configurator, it's child's play and you can be sure that everything has been thought of.

We have already preconfigured the standard case for you based on a 20 m² area. Just go through the list of components again and adapt the desired variants and quantities to your own project. Pay attention to the number of square metres specified in each case so that everything fits together perfectly at the end of the selection process. We hope you enjoy your new bathroom now.

If you have any questions, please contact us or visit our FORUM.

The Moertelshop provides you with practical tools and materials for art, design, construction and handicrafts with concrete at a fair price. Buy from us online and take advantage of our unbeatably low shipping costs.

Write the first review for this item and help others make a purchase decision!

There are no reviews yet.

Others also bought:

LFC concrete silicification, 2.5 L

85,10 € *

34,04 € per 1 l

KLEMO adhesive mortar, white, 25 kg

51,80 € *

2,07 € per 1 kg